Thiết bị ghi dữ liệu - Dòng rò Kyoritsu 5010, K5010
Mã sản phẩm: 5010
Giá bán : Liên hệ
Hãng sản xuất: Kyoritsu - Nhật
Bảo hành: 12 tháng
Xuất xứ: Còn hàng
Chia sẻ sản phẩm này với bạn bè:
THÔNG SỐ KỸ THUẬT:
True RMS
Chế độ ghi bình thường:
+ Giải đo : 100mA
+ Độ chính xác : ±2.0%rdg±5dgt
+ Độ chính xác có cảm biến :|±2.0%rdg±10dgt
Chế độ ghi khởi động :
+ Giải đo : 100mA
+ Độ chính xác : ±3.5%rdg±5dgt
+ Độ chính xác có cảm biến :|±3.5%rdg±10dgt
Chế độ ghi thu thập
+ Giải đo : 100mA
+ Độ chính xác : ±3%rdg±5dgt
+ Độ chính xác có cảm biến :|±3.0%rdg±10dgt
Đầu vào : AC
Số kênh : 3
Trở khánh : 50MΩ
Nguồn : DC 6V - LR6 × 4
Kích thước :111 (L) × 60 (W) × 42 (D) mm
Khối lượng : 265g
Phụ kiện : Pin, cáp USB, CD, bao đựng
Bảo hành : 12 tháng
Hãng sản xuất : Kyoritsu - Nhật
Xuất xứ : Nhật
|
|
 |
3 channel inputs for the simultaneous recording of Leakage Current, Load Current and Voltage |
|
• |
Power Quality analysis
(only on KEW 5020)
(Power Quality:Reference voltage, Swell, Dip, Short power Interruptions) |
|
|
Large Capacity for storing 60,000 data points |
 |
60,000 data points can be recorded when 1ch is used, and when all the three channels are used, 20,000 data points per channel can be recorded |
|
|
Lowpass Filter will filter out the harmonics
(Cutoff Frequency = Approx. 160Hz) |
|
|
LED flickers when the preset current / voltage value is exceeded |
|
|
CALL: Confirmation of recorded data |
|
• |
The following can be displayed: number of recorded data points, (max+ min+ peak) value for each channel complete with time/date information in the Normal recording mode. (Detected values (i.e. when values are outside preset limits ) can be displayed in other recording modes) |
|
• |
RECALL: The last 10 recorded data points including time/date can be recalled on the logger display |
|
 |
|
|
|
|
|
Selection of One-time mode or Endless mode |
|
• |
One-time on: Recording will stop when memory is used up |
|
• |
One-time off: Overwrite the old data, and store the latest data |
|
|
|
|
Non Volatile Memory |
|
|
Recorded data will be retained even if the batteries are exhausted or replaced due to the presence of a nonvolatile memory (guaranteed for 10 years) |
|
|
|
|
Battery power indicator |
|
|
Indicates battery voltage in 4-levels
(It is possible to use the logger for a further approx. 24 hours even after the warming symbol is flashing) |
|
|
|
|
The userfriendly PC software "KEW LOG Soft 2" is supplied |
|
• |
Supplied with the user friendly software "KEW LOG Soft 2". This permits editing, analysis and graphical display of data. |
|
• |
The recorded data is downloadable onto a PC via USB cable. |
|
• |
Variation of the measured voltage and current data can be confirmed simultaneously on the PC display monitor. (only on KEW 5020) |
|
• |
Simplified Power Integration
(The "KEW LOG Soft 2" uses current and voltage recorded to calculate the integral power consumption) |
|
• |
Continuous measuring time: Approx. 10 days (Alkaline Battery) |
|
|
|
 |
|
|
|
|
|
|
Normal Recording Mode
(AC 50/60Hz, Sine wave, Input: 10% or more of the range at CH1) |
|
|
Range |
RMS Accuracy |
|
100.0mA |
|±2.0%rdg±0.9%f.s.+ Accuracy of Sensor |
|
Other ranges |
|±1.5%rdg±0.7%f.s.+ Accuracy of Sensor |
|
Crest Factor |
|2.5 or less: RMS accuracy (sine) + 2%rdg + 1%f.s. |
|
*Max, Min and Instant Peak values in Normal Recording mode are just reference values:
their accuracies aren't guaranteed.
Trigger Recording Mode (AC 50/60Hz sine wave)
|
Range |
Accuracy |
|
100.0mA |
|±3.5%rdg±2.2%f.s.+ Accuracy of Sensor |
|
Other ranges |
|±3.0%rdg±2.0%f.s.+ Accuracy of Sensor |
|
Capture/Power Quality Analysis Recording Mode
|
Range |
Accuracy |
|
100.0mA |
|±3.0%rdg±1.7%f.s.+ Accuracy of Sensor |
|
Other ranges |
|±2.5%rdg±1.5%f.s.+ Accuracy of Sensor |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
KEW 5010 |
|
|
|
KEW 5020 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Recording Mode |
|
|
|
Normal, Trigger, Capture |
|
|
|
Normal, Trigger, Capture, Power Quality Analysis |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Operating System |
|
|
|
Successive Approximation
(CH1 single synchronized sampling) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Rated max. working voltage |
|
|
|
AC 9.9Vrms, 14V peak value |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Number of input channel |
|
|
|
3ch |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Measuring method |
|
|
|
True RMS |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
RMS measuring interval |
|
|
|
approx. 100ms |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Sampling interval |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Normal/Trigger mode |
|
|
|
approx. 1.65ms/CH |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Capture mode |
|
|
|
approx. 0.55ms (waveform: at every 1.1ms) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
P.Q.A. mode |
|
|
|
- |
|
|
|
approx. 0.55ms |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Low battery warning |
|
|
|
Battery mark display (in 4 levels) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Over-range indication |
|
|
|
"OL" mark is displayed when exceeding the measuring range |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Auto power off |
|
|
|
Power-off function operates automatically after a switch remains for 3min. (when recording is stopped) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Location for use |
|
|
|
Indoor use, Altitude up to 2000m |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Operating temperature & humidity range |
|
|
|
-10ºC~50ºC / Relative humidity 85% or less (no condensation) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Battery |
|
|
|
DC6V: Alkaline battery (LR6) ×4pcs / External supply DC9V (Special AC Adapter) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Possible measurement time |
|
|
|
Approx. 10 days (with alkaline LR6 batteries) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Applicable standards |
|
|
|
IEC 61010-1:2001 CAT.III 300V Pollution degree2
IEC 61326 (EMC standard) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Withstand voltage |
|
|
|
AC 3540V (RMS 50/60Hz) / for 5 sec. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Dimension |
|
|
|
111(L)×60(W)×42(D)mm |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Weight |
|
|
|
Approx. 265g |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Accessories |
|
|
|
Alkaline battery LR6×4pcs, 9118 (Carrying case)
PC software "KEW LOG Soft 2", 7148 (USB cable)
Instruction manual, Quick manual, Install manual,
USB Notice sheet |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Optional |
|
|
|
8146/8147/8148 (Leakage & Load current Clamp Sensor),
8121/8122/8123 (Load current Clamp Sensor),
8129 (Flexible Clamp Sensor),
8309 (Voltage Sensor: only KEW 5020), 8320 (AC Adapter),
9135 (Carrying bag), 9119 (Hard carry case),
7185 (Extension cable for sensor) |
|
|
Cataloge 
Manual 
