|
|
GP-4311HT |
|
International Safety Standards |
     |
|
Rated Input Voltage |
24Vdc |
|
Input Voltage Limits |
DC 19.2 to 28.8Vdc |
|
Allowable Voltage Drop |
10ms or less |
|
Power Consumption |
12W or less (When power is not supplied to external devices: 8W or less) |
|
In-Rush Current |
35A or less |
|
Voltage Endurance |
500Vac, 20mA for 1 minute (between charging and FG terminals) |
|
Insulation Resistance |
500Vdc, 10MΩ or more (between charging and FG terminals) |
|
Surrounding Air Temperature |
0 to 40°C (32 to 104°F) |
|
Storage Temperature |
-20 to 60°C (-4 to 140°F) |
|
Ambient Humidity |
10% to 90% RH (Non Condensing, Wet Bulb Temperature 39°C [102.2°F] or less) |
|
Storage Humidity |
10 to 90% RH (Wet Bulb Temperature: 39°C max. - No condensation.) |
|
Dust |
0.1 mg/m3 (10-7 oz/ft3) or less (Non-conductive Levels) |
|
Pollution Degree |
For use in pollution degree 2 environment |
|
Atmosphere |
Free of corrosive gases |
|
Air Pressure (Altitude Range) |
800 to 1,114hPa (2,000m [6,561ft] or lower) |
|
Vibration Resistance |
IEC/EN 61131-2 compliant 5 to 9Hz Single amplitude 3.5mm (0.14 in.)
9 to 150Hz Fixed acceleration: 9.8m/s2
X, Y, Z directions for 10 cycles (Approximately 100 Minutes) |
|
Shock Resistance |
IEC/EN 61131-2 compliant 147m/s2, X, Y, Z directions for 3 times |
|
Noise Immunity |
Noise Voltage: 1,000Vp-p
Pulse Duration: 1ms, Rise Time: 1ns (via noise simulator) |
|
Electrostatic Discharge Immunity |
Contact Discharge Method: 6kV (IEC/EN 61000-4-2 Level 3) |
|
Drop Resistance |
IEC 61131-2 Compliant 1.0m [3.3ft] Drop - 2 Times |
|
Grounding |
Functional Grounding: Grounding resistance of 100Ω, 2mm2 (AWG 14) or thicker wire, or your country's applicable standard (same for FG and SG terminals). |
|
Structure *8 |
IP65F |
|
Weight Approx. |
910g (2.01lb) or less: without a key switch, unit only
960g (2.12lb) or less: with a key switch, unit only
|
